Composite manufacturing lines
Plastic Sand Compound Extruder To Make Roof, Lamellas And Pavement Bricks Paving Tile
Mix sand with PVC and PP crushing extrusion to make block, Extruison and mixing unit from the machine to make block or bricks and to pave roads.
Material is mixed by mixer and come into the rotary charger, Then rotary charger will send the material into the extruder, After the extrusion, the material will mixed together equally.
Many kinds of plastic materials can be processed directly without degassing. After extrusion the material can be used to make block.
Heating screw extruder for plastic sand composition from waste plastic HDPE LDPE PP PVC and sand
How the machine works:
1. First you can weigth each material, like we use pp mixture PE - 25 kg,filler - 25 kg, pvc dust powder PVC -15 kg,Sand
- 45 kg, And you can use up to your requirement, PP,PE PVC all are possible. .
2. Each material put into the mixer and the mixer will mix all of these material for about 10mins, and then open the mouth on the mixer, the material will come down into the Rotary charger hopper.
3. Rotary charger send the mixed material into the extruder feeder, When the feeder is full, the Rotary charger will stop by itself. If there is no material in the hopper, you can restart the rotary charger.
4. Then material is plasticised and degassed in the extruder screw, next the material will be plasticised and melt together in the screw, with the extrusion, the material comes out.
5. After weigth the block material, then hydraulic pressre can make each kinds of blocks with its design.
Material is mixed by mixer and come into the rotary charger, Then rotary charger will send the material into the extruder, After the extrusion, the material will mixed together equally.
Many kinds of plastic materials can be processed directly without degassing. After extrusion the material can be used to make block.
Heating screw extruder for plastic sand composition from waste plastic HDPE LDPE PP PVC and sand
How the machine works:
1. First you can weigth each material, like we use pp mixture PE - 25 kg,filler - 25 kg, pvc dust powder PVC -15 kg,Sand
- 45 kg, And you can use up to your requirement, PP,PE PVC all are possible. .
2. Each material put into the mixer and the mixer will mix all of these material for about 10mins, and then open the mouth on the mixer, the material will come down into the Rotary charger hopper.
3. Rotary charger send the mixed material into the extruder feeder, When the feeder is full, the Rotary charger will stop by itself. If there is no material in the hopper, you can restart the rotary charger.
4. Then material is plasticised and degassed in the extruder screw, next the material will be plasticised and melt together in the screw, with the extrusion, the material comes out.
5. After weigth the block material, then hydraulic pressre can make each kinds of blocks with its design.
Model | J100 | J120 | J130 | J160 |
Screw Diameter (mm) | 100 | 120 | 130 | 160 |
Main Motor Power (kW) | 55 | 90 | 132 | 160 |
Capacity (kg/h) | 150–200 | 200–250 | 400–500 | 700–800 |
WPC wood and plastic composite and mixer granulation pelletizing machine
WPC wood and plastic composite pelletizing extrusion machine line in low price, compounding wood powder with plastic and other additives, then it can be used to make floor, door, window and other parts.
1.WPC pellets plastic production line consists of conical twin screw extruders, wind blower, crusher, wind blower and silo.
2.Twin screw and barrel with high quality alloy extrusion for pellet. each degassing with force press system, in order to press the wood go into the extruder.
3. Crusher to crush the material which come out from the extruder.
1.WPC pellets plastic production line consists of conical twin screw extruders, wind blower, crusher, wind blower and silo.
2.Twin screw and barrel with high quality alloy extrusion for pellet. each degassing with force press system, in order to press the wood go into the extruder.
3. Crusher to crush the material which come out from the extruder.
Model | T20 | T35 | T50 | T65 | T75 | T95 |
Screw Diameter (mm) | 21.7 | 35.6 | 50.5 | 62.4 | 71.2 | 91 |
L/D Ratio | 32–40 | 32–40 | 28–48 | 28–48 | 28–48 | 28–48 |
Extruder Speed (RPM) | 600 | 400 | 400 / 600 | 400 / 500 | 500 / 600 | 500 / 600 |
Main Motor Power (kW) | 4 | 11 / 15 | 37 / 45 | 55 / 75 | 90 / 110 | 200 / 250 |
Capacity (kg/h) | 2–10 | 10–80 | 80–150 | 250–400 | 350–500 | 800–1000 |
PEK PA66 Nylon with glass fiber twin screw extrusion granulation machine
Twin screw/double screw compounding extruder is specially designed for compounding PE (LLDPE, LDPE, HDPE), PP, PA6, PA66,PC, PEK,TPE and Copolymers such as SBS,Color batches,Filler modified resin and additives (UV protection Materials, Modified, EVA, black carbon granule, flame-retardant granule.
The machine has excellent mixing performance, good self-cleaning performance and flexible modular configuration characteristivs which make them suitable for processing different types of material.
Different kinds of side doser is used to feeder different kinds or types of material. There is also doser to weight the additives material to make up a prescription.
The machine has excellent mixing performance, good self-cleaning performance and flexible modular configuration characteristivs which make them suitable for processing different types of material.
Different kinds of side doser is used to feeder different kinds or types of material. There is also doser to weight the additives material to make up a prescription.
Model | TK20 | TK35 | TK50 | TK65 | TK75 | TK95 |
Screw dia (MM) | 21,7 | 35,6 | 50,4 | 62,4 | 71,2 | 91 |
L/D | 32-40 | 28-48 | 28-48 | 28-48 | 28-48 | 28-48 |
Extruder speed RPM | 600 | 400 | 400/600 | 400/500 | 500/600 | 500/600 |
main power motor KW | 4 | 11/15 | 37/45 | 55/75 | 90/110 | 200/250 |
Capacity KG | 2-10 | 10-80 | 80-150 | 250-400 | 350-500 | 800-1000 |
